Page 98 - 吉多瑞KL乘用车精修工具

Kapitel04_EN.fm Seite 96 Donnerstag, 6. Mai 2021 11:02 11
4. 发动机维修 Kapitel04_EN.fm Seite 97 Donnerstag, 6. Mai 2021 11:02 11
4. Engine Maintenance/Repairs
4.5 - Glow Plug / Spark Plug 4.5 - Glow Plug / Spark Plug
4.5 电热塞 / 火花塞
KL-0132-55 K (Code 2691566) KL-0132-52 K (Code 2123444)
KL-0132-55 K KL-0132-52 K
( 编码 2691566)
9 pcs.
9 件式 9 pcs.
Glow Plug Tool Set (Universal), M8x1 Glow Plug Tool Set (Universal), M10x1
通用电热塞工具组 (M8x1)
Suitable for use on M8x1 glow plug threads,e.g. on Mercedes OM639, OM640, Suitable for use on M10x1 glow plug threads; as found in VW-Audi, Mercedes,
适用于 M8x1 电热塞螺纹，例如 Mercedes OM639、OM640、OM642、OM651
OM642, OM651 and Fiat 1.3 JTD, 2.3 JTD, 3.0 JTD. Opel/Vauxhall, Peugeot, Renault etc.
和 Fiat 1.3 JTD、2.3 JTD、3.0 JTD。
The universal glow plug tool set KL-0132-55 K enables the quick and easy drilling out The universal glow plug tool set KL-0132-52 K enables the quick and easy drilling out
通用电热塞工具套件 KL-0132-55 K 可以快速轻松地钻出损坏或断裂的电热塞。
of damaged or broken-off glow plugs. of damaged or broken-off glow plugs.
电热塞或电热塞头用芯孔钻钻出或扩孔。然后用专用丝锥重新切割原始螺纹并清
The glow plug, respectively the top part of the glow plug is drilled out or drilled up The glow plug, respectively the glow plug top portion, is drilled out or drilled up with
洁。然后用丝锥或牵引螺栓连同滑动锤拉出剩下的电热塞体。
with the aid of the pilot drill. Next, the original thread is recut and cleaned by means the aid of the pilot drill. Next, the original thread is recut and cleaned by means of the
该工具组还包括两个用于 Fiat JTD 发动机和 Mercedes CDI 发动机的特殊导套，可
of the special screw tap. The residual glow plug body can then be extracted using the special tap. The residual glow plug body can then be extracted using the screw tap or
确保精确的定心、导向和钻孔深度。
screw tap or a puller bolt in conjunction with a slide hammer puller. a puller bolt in conjunction with a slide hammer puller.
The tool set also contains two special guide sleeves for Fiat JTD and Mercedes CDI The tool set also contains two special guide sleeves for VW Audi V6 TDI and Mercedes
推荐配件：
engines. These sleeves ensure precise alignment and guidance as well as accurate CDI engines. These sleeves ensure precise alignment and guidance as well as
KL-0049-100 - 滑动锤
drilling depth. accurate drilling depth.
KL-0369-300 A - 滚筒翻转器
Recommended Accessory:
供货范围：
Recommended Accessory: KL-0049-100 Slide Hammer Puller, KL-0369-300 A Roller-Type Stud Removal Socket
KL-0132-55 K - 通用电热塞工具组
KL-0049-100 Slide Hammer Puller (M8x1)
KL-0369-300 A Roller-Type Stud Removal Socket 数量 Scope of Delivery:
描述
产品编号
KL-0132-5501 牵引螺栓编号 12-24 UNC，用于滑动锤 1 KL-0132-52 K Glow Plug Tool Set (Universal), M10x1
Scope of Delivery: 用于 M8x1 的芯孔钻 Ø 7.1 mm 1 Part No. Description Qty
KL-0132-5502
KL-0132-55 K Glow Plug Tool Set (Universal), M8x1 1 KL-4007-2510 Adaptor for Power Drill, 3/8" , Square Socket 1
丝锥 M8x1
KL-0132-5503
Fiat JTD 导套
KL-0132-5504
Part No. Description Qty 1 KL-0283-7003 Guide Sleeve, Ø 13mm 1
Mercedes /Fiat 导套
KL-0132-5505
KL-0132-5501 Puller Bolt No. 12-24 UNC for Slide Hammer Puller 1 1 KL-0132-5201 Guide Sleeve, for Mercedes 1
KL-0369-306
带方形底座的刀架
KL-0132-5502 Pilot Drill, Ø 7.1mm, for M8x1 1 1 KL-0283-7021 Pilot Drill, Ø 9.1mm for M10x1 1
丝锥编号 12-24 UNC
KL-1383-2241
KL-0132-5503 Screw Tap M8x1 1 1 KL-0283-7022 Screw Tap, M10x1 1
钻孔机适配器 3/8"
KL-4007-2510
KL-0132-5504 Guide Sleeve for Fiat JTD 1 1 KL-0369-306 Tap Wrench with Square Socket, 2.4-5.5mm 1
软轴磁力棒
KL-0126-221
KL-0132-5505 Guide Sleeve for Mercedes 1 1 1 KL-0369-3056 Screw Tap, 1/4"-20 UNC, with Drill Bit 1
塑料箱体
KL-0132-5590 A
KL-0369-306 Tap Wrench with Square Socket 1 KL-0132-5202 Puller Bolt, 1/4"-20 UNC, for Slide Hammer Puller 1
KL-1383-2241 Screw Tap No.12-24 UNC 1 KL-0126-221 Flexible Magnetic Lifter 1
KL-4007-2510 Adaptor for Power Drill, 3/8" 1 KL-0132-5290 A Plastic Storage Case 1
KL-0126-221 Flexible Magnetic Lifter 1
KL-0132-5590 A Plastic Storage Case 1
KL-0132-61 KA (Code 3043800) 7 pcs.
KL-0132-61 KA KL-0132-62 KA (Code 3043835) KL-0132-62 KA
( 编码 3043800)
7 件式 Glow Plug Tool Set (Universal),
7 pcs.
通用电热塞工具组 (M9x1)
Glow Plug Tool Set (Universal), M9x1
普遍适用于 Alfa、Fiat、Lancia、Opel 和 Saab 1.9 以及带有 M9x1 电热塞螺纹
Universally suitable for use on the Alfa, Fiat, Lancia, Opel/Vauxhall and Saab 1.9 M10x1.25
as well as 2.4 D / TiD / JTD / JTDM / CDTI Diesel engines having an M9x1 glow Universally applicable to Opel/Vauxhall, Mazda, Ford, Hyundai, Honda, Kia,
的 2.4 D / TiD / JTD / JTDM / CDTI 柴油发动机。安装于 Alfa 147、156、159、
plug retaining thread. Mini, Nissan and Toyota 1.4-3.0 D / DI / DTI / TD / CRDi / CDTi Diesel engines
166、GT；Opel Astra H、Astra V、Signum、Vectra C、Za ra；Saab 9-3; Fiat
For example, fitted to Alfa 147, 156, 159, 166, GT; Opel/Vauxhall Astra H, Astra V, having an M10x1.25 glow plug retaining thread.
Croma、Stilo；LanciaThesis 等。
Signum, Vectra C, Zafira; Saab 9-3; Fiat Croma, Stilo; Lancia Thesis etc. For example, fitted to Opel/Vauxhall Astra G, Astra H, Combo, Corsa C, Meriva,
( 发动机编码： 192A5.000, 841G.000, 841H.000, 937A5.000, 939A2.000, 939A3.000,
(Engine codes: 192A5.000, 841G.000, 841H.000, 937A5.000, 939A2.000, Signum, Vectra C; Mazda 626 II, 626 III, 626 IV, MPV I, B-Serie; Ford Ranger;
939A8.000, Z19DTH, Z19DTJ)
939A3.000, 939A8.000, Z19DTH, Z19DTJ) Hyundai Accent, Getz, Matrix; Honda Civic VI; Kia Besta, Pregio, K2700; Mini One
通用电热塞工具套件 KL-0132-61 KA 可以快速轻松地钻出损坏或断裂的电热塞。 D; Nissan Serena, Terrano II, Vanette; Toyota Yaris, Corolla etc.
The universal KL-0132-61 KA glow plug tool set enables the quick and easy drilling (Engine codes: 1ND, 1ND-TV, 4EE-2, CD23, D4FA, LD23, MD25TI, R2, RF OHC,
电热塞或电热塞头用芯孔钻钻出或扩孔。然后用专用丝锥重新切割原始螺纹并清
out of damaged and broken-off glow plugs. RF46, RF-CX, RF-N, TD27T, WL, WL-T, Y17DT, Y17DTL, Y30DT, Z17DTL, Z30DT)
洁。然后用丝锥或牵引螺栓连同滑动锤拉出剩下的电热塞体。
First, the glow plug, the glow plug top portion respectively, is drilled out/drilled up
with the aid of the pilot drill. Next, the original thread is re-tapped and cleaned with The universal KL-0132-62 KA glow plug tool set enables the quick and easy drilling
推荐配件：
the special screw tap. The remains of the glow plug body can then be removed by out of damaged and broken-off glow plugs.
KL-0049-100 - 滑动锤
using either the screw tap or the puller bolt in conjunction with a slide hammer puller. First, the glow plug, the glow plug top portion respectively, is drilled out/drilled up
KL-0369-300 A - 滚筒翻转器 with the aid of the pilot drill. Next, the original thread is re-tapped and cleaned with
Recommended Accessory: the special screw tap. The remains of the glow plug body can then be removed using
供货范围：
KL-0049-100 Slide Hammer Puller either the screw tap or the puller bolt in conjunction with a slide hammer puller.
KL-0132-61 KA - 通用电热塞工具组 (M9x1)
KL-0369-300 A Roller-Type Stud Removal Socket Recommended Accessory:
产品编号 描述 数量
KL-0126-221 软轴磁力棒 1 KL-0049-100 Slide Hammer Puller, KL-0369-300 A Roller-Type Stud Removal Socket
Scope of Delivery: 牵引螺栓编号 12-24 UNC，用于滑动锤 1 Scope of Delivery:
KL-0132-5501
KL-0132-61 KA Glow Plug Tool Set (Universal), M9x1 1 KL-0132-62 KA Glow Plug Tool Set (Universal), M10x1.25
用于 M9x1 的芯孔钻 Ø 8.1 mm
KL-0132-6101
KL-0132-6102
丝锥 M9x1
Part No. Description Qty 1 Part No. Description Qty
KL-0369-306
带方形底座的刀架 2.4 - 5.5
KL-0126-221 Flexible Magnetic Lifter 1 1 KL-0126-221 Flexible Magnetic Lifter 1
带钻头的丝锥编号 12-24 UNC
KL-1383-2241
KL-0132-5501 Puller Bolt No. 12-24 UNC, for Slide Hammer Puller 1 1 KL-0132-5202 Puller Bolt, 1/4"-20 UNC, for Slide Hammer Puller 1
KL-4007-2510
方形钻孔机适配器 3/8"
KL-0132-6101 Pilot Drill, Ø 8.1mm, for M9x1 1 1 KL-0132-6201 Screw Tap, M10x1.25 1
KL-0132-5590 A
塑料箱体
KL-0132-6102 Screw Tap, M9x1 1 1 KL-0283-7021 Pilot Drill, Ø 9.1mm, for M10x1.25 1
KL-0369-306 Tap Wrench with Square Socket, 2.4-5.5mm 1 KL-0369-3056 Screw Tap, 1/4"-20 UNC, with Drill Bit 1
KL-1383-2241 Screw Tap No.12-24 UNC, with Drill Bit 1 KL-0369-306 Tap Wrench with Square Socket, 2.4-5.5mm 1
KL-4007-2510 Adaptor for Power Drill, 3/8", Square 1 KL-4007-2510 Adaptor for Power Drill, 3/8", Square 1
KL-0132-5590 A Plastic Storage Case 1 KL-0132-5590 A Plastic Storage Case 1
96 Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly 97