Page 82 - 吉多瑞KL乘用车精修工具

Kapitel04_EN.fm Seite 80 Donnerstag, 6. Mai 2021 11:02 11
4. 发动机维修 Kapitel04_EN.fm Seite 81 Donnerstag, 6. Mai 2021 11:02 11
4. Engine Maintenance/Repairs
4.3 Fuel System; 4.4 Injection System 4.4 Injection System
4.3 燃油系统；4.4 燃油喷射系统
KL-0286-20 KL-0286-20 (Code 2930331) KL-0186-9101 A (Code 3283836) KL-0186-9101 A
( 编码 2930331)
2 件式 3 pcs.
2 pcs.
Socket Wrench Set, (waf 10mm) for Upgrade Kit, M14 / 45°
套筒扳手套件 SW 10
用于 VW 涡轮增压器
Pressure Capsule with Charge Pressure Universally applicable to Bosch injector nozzles equipped with a detachable high-
Actuator Position Sensor, VW pressure fuel line connector having an M14x1.5 and M14x1 internal thread (45°
适用于废气涡轮增压器上带位置传感器的压力调节喷嘴。安装在 2.0 共轨柴油
angled). For example, fitted to: VW-Audi, Seat, Skoda, Citroën, Fiat, Iveco, PSA,
发动机上，例如 VW Golf VI (5K)、Golf Plus (52)、Dacia(1K)、Passat (3C)、 Peugeot. Particularly suitable with Fiat Ducato, IVECO Daily 2.8 JTD; VW Golf 6,
Suitable for the pressure capsule with charge pressure actuator position sensor Tiguan, Touran 2.0 TDI (engine code CFFB); Industrial diesel engines HATZ 4H50TIC.
PassatCC (35)、Scirocco (13)、Eos (1F)、Tiguan (5N) )、Transporter T5 (2010 年起，
at the exhaust gas turbocharger fitted to 2.0 Common Rail Diesel engines. For the quick and easy extraction of tight-fitting or seized injector nozzles.
7J、7H、7G、7F) 和 Audi A3 (8P)。
For example found in: Golf VI (5K), Golf Plus (52), Jetta (1K), Passat (3C), Passat Indispensable tools when removing the valve cover and replacing injector nozzles.
CC (35), Scirocco (13), Eos (1F), Tiguan (5N), Transporter T5 (from 2010 upwards,
替代工具：T10422、T10423
Recommended Accessory:2093 U-20 Reversible Ratchet 1/4"
推荐配件：2093 U-20 - 中空式棘轮两用扳手 1/4" 7J, 7H, 7G, 7F) and Audi A3 (8P). Scope of Delivery: KL-0186-9101 A Upgrade Kit, M14 / 45° Qty Recommended Accessory:
在拆卸和安装带位置传感器的升压控制箱时需要用到，用于通过符合规范的方式
Part No.
Description
提示：如果松开、调整和拧紧控制杆操作不符合规范，则升压 Alternative tool: T10422, T10423 KL-0186-9101-1 Adaptor Plate, M14x1.5 / 45° 1 KL-0186-9101 A Upgrade Kit, M14 / 45°
松开、调整和拧紧控制杆。
Note: If the control rod is not loosened, adjusted and tightened correctly,
控制箱可能会损坏。 This tool set is designed for the professional loosening, adjustment and tightening of KL-0186-9101-2 Special Bolt, M14x1.5 1 KL-0186-9301 Upgrade Kit, Denso, M14x1.5 / 30°
there is a risk of damage to the pressure capsule.
供货范围：
the control rod when removing/installing the pressure capsule along with the charge KL-0186-9101-3 Special Bolt, M14x1 1 KL-0186-9401 Upgrade Kit, M12x1, 20°
Technical Data:
技术参数 : pressure actuator position sensor.
KL-0120-81 K - 油箱传感器扳手套件
10mm
Width across flats (KL-0286-2001):
扳手开口度（KL-0286-2001）： 10 mm 产品编号 描述 数量 KL-0186-9301 (Code 3133273) KL-0186-9301
扳手开口度（KL-0286-2002）： 10 / 12 mm Scope of Delivery: KL-0286-20 Socket Wrench Set, (waf 10mm) 1 2 pcs.
Width across flats (KL-0286-2002):
10/12mm
KL-0286-2001
扳手套筒插件 SW 10
50mm
Length (KL-0286-2001):
长度（KL-0286-2001）： 50 mm Part No. Description Qty 1 Upgrade Kit, Denso, M14x1.5 / 30°
KL-0286-2002
弯曲的梅花扳手 SW 10 / SW 12
长度（KL-0286-2002）： 144 x 55 mm KL-0286-2001 Socket (waf 10mm) 1
144x55mm
Length (KL-0286-2002):
1/4"
Drive:
驱动器： 1/4" KL-0286-2002 Combination Spanner (bent design), waf 10/12mm 1 Universally applicable to Denso injector nozzles equipped with a high-pressure
fuel line connector having an M14x1.5 external thread (30° angled).
系列
304.. Serie For example, fitted to: Opel/Vauxhall.
304.. Serie
C 型梅花扳手
Half moon ring spanner For the quick and easy extraction of tight-fitting or seized injector nozzles.
Indispensable tools when removing the valve cover and replacing injector nozzles.
Scope of Delivery: KL-0186-9301 Upgrade Kit, Denso M14x1.5 / 30° Necessary Accessories:
Universal application. KL-0186-91 EA Injector Nozzle Puller Set
普遍适用。
Required for the correct loosening and tightening of the turbocharger fixing bolts. Part No. Description Qty KL-0369-4100 (1.5kg) or KL-0049-300 (4.8kg) Slide Hammer Puller
在通过符合规范的方式松开和拧紧涡轮增压器紧固螺钉时需要用到。由于采用薄
Adaptor Plate, Denso M14x1.5 / 30°
1
KL-0186-9301-1
With extra thin-walled rings, particularly necessary in very tight spaces.
壁环形，它特别适用于非常狭小的空间。 KL-0186-9301-2 Threaded Sleeve, M14x1.5 1
Available Sizes: KL-0186-9401
可用尺寸：
Part No. 长 (mm) a1 (mm) a2 (mm) Size1/Size2 Code-No. KL-0186-9401 (Code 3133311) 4 pcs.
a1 (mm)
a2 (mm)
L (mm)
产品编号
编码编号
SW1/SW2
7.5
304 11x13 150 150 7.0 7.0 7.5 11/13 6470040
11/13
304 11x13
6470040
8.5
304 13x15 185 185 8.5 8.5 8.5 13/15 6470630 Upgrade Kit, M12x1 / 20°
6470630
13/15
304 13x15
304 13x17 185 185 8.5 8.5 8.5 13/17 6470120
8.5
304 13x17
13/17
6470120
8.5
304 14x16 185 185 8.5 8.5 8.5 14/16 6470200 Universally applicable to Bosch and Siemens/VDO injector nozzles equipped with
304 14x16
6470200
14/16
304 14x17 185 8.5 8.5 14/17 6470390 a detachable high-pressure fuel line connector having an M12x1 internal thread
304 14x17 185 8.5 8.5 14/17 6470390
304 15x17 185 185 8.5 8.5 8.5 15/17 6470470 (20° angled). For example, fitted to: Citroën, Ford, Jaguar, PSA, Peugeot.
8.5
15/17
6470470
304 15x17
304 16x18 185 8.5 8.5 16/18 6567550 For the quick and easy extraction of tight-fitting or seized injector nozzles.
304 16x18 185 8.5 8.5 16/18 6567550
304 19x22 230 10.0 10.5 19/22 6470550 Indispensable tools when removing the valve cover and replacing injector nozzles.
304 19x22 230 10.0 10.5 19/22 6470550
KL-0186-91 EA KL-0186-91 EA (Code 3283992) Scope of Delivery: KL-0186-9401 Upgrade Kit, M12x1 / 20°
( 编码 3283992)
14 pcs. Part No. Description Qty
14 件式
14 件式
喷油器起拔器套件，带有工具模块可放
Injector Nozzle Puller Set, in a Foam Insert KL-0186-9001-2 Special Bolt, M12x1 1 1 Necessary Accessories:
Special Bolt, M12x1, long
KL-0186-9001-3
于工具箱或工具车内
Universally suitable for Denso injector nozzles with high-pressure fuel line KL-0186-9001-4 Sleeve 1 1 KL-0186-91 EA Injector Nozzle Puller Set
KL-0369-4100 (1.5kg) or KL-0049-300 (4.8kg) Slide Hammer Puller
KL-0186-9401-1
Adaptor Plate, M12x1 / 20°
connector having an M12x1.5 / 30° external thread. Also suitable for Bosch and
普遍适用于带有 M12x1.5 / 30°燃油接口外螺纹的 Denso 喷油器，以及带有
Siemens/VDO injector nozzles with detachable high-pressure fuel line KL-0186-95 K
connector having an M12x1 / 45° internal thread. 和 SLEMENS/ VDO 喷油器。 KL-0186-95 K (Code 3296873) 12 pcs.
M12x1 / 45 °内螺纹的可拆卸燃油接头的 BOSCH
For example, fitted to: BMW, Mercedes, Chrysler, Chevrolet, Citroen, Fiat, Hyundai,
安装于 VW-Audi、Seat、 Skoda 、BMW、Mercedes、Chrysler、Chevrolet、
Iveco, Lancia, Opel/Vauxhall, PSA, Peugeot, Renault, Saab, Suzuki, Toyota. Injector Extractor Set (VM-Motori/HATZ-Diesel/Iveco)
Citroen、Fiat、Hyundai、Iveco、Lancia、Opel、PSA、Peugeot、Renault、
Alternative tool: T10415等。尤其适用于 VW-Audi、Seat、Skoda (CFHA、CFJA、 Universally fits agricultural machines, construction machines, and municipal
Saab、Suzuki、Toyota
CFFB、CAYC)；BMW (M47/M57)；Mercedes (OM611、OM612、OM613、 vehicles with engines from VM-Motori as well as HATZ-Diesel and Iveco. For
For the quick and easy extraction of tight-fitting or seized injector nozzles. example, the motor series: VM-Motori R754 (Euro 5 +Euro 6), R756 (Euro 6); HATZ-
OM646、OM647、OM648) 和 PSA (DW10)。
An indispensable tool set when removing the valve cover or replacing injector Diesel H-Serie 3H50 TIC, 4H50 TIC; Iveco F1CE3 (Euro 5), 8140.43 (Euro 3).
替代工具：T10415
nozzles. Thanks to the special bolts that come with the set, the puller can be fixed via For example, installed at Aebi, Boki, Boschung, Bulmor, Bucher, Hako, Hansa,
the high-pressure fuel line connector. This eliminates the need for opening the Kärcher, Ladog, Lindner, Meili, MFH, Reform, Schell, Schmidt, Trilety.
用于快速轻松地拉出卡住的喷油器。
injector nozzle. The special design of the tool also ensures optimum and damage-free
例如，在拆卸气门盖或更换喷油器时需要用到。无需打开喷油器，因为喷油器起
power transmission. For quick and professional extraction of stuck injectors from the cylinder head, in
拔器可使用套件中包含的特殊螺钉连接到燃油接头上。特殊的结构保证了最佳且 conjunction with an impact extractor (mounting thread: M18x2.5). It is required when
Necessary Drive Parts (cf. Chapter Drives): removing the valve cover, for example, and when renewing the injectors.
无损的力传输。通过包含在供货范围内的连接件，力可以纵向传递到喷油器
KL-0369-4100 (1.5kg) or KL-0049-300 (4.8kg) Slide Hammer Puller The special design of the injector extractor allows the injector to be pulled out without
所需 驱动配件 ( 参见驱动一章 )：
Tool Storage System: KL-4990-9326 - Plastic Storage Case having to open it, directly above the fuel connection. Injectors that have been opened
KL-0369-4100 (1.5 kg) 或 KL-0049-300 (4.8 kg) - 滑动锤
must be sent in for repair according to the manufacturer's instructions.
Scope of Delivery: Scope of Delivery: KL-0186-95 K Injector Extractor Set
供货范围：
KL-0186-91 EA Injector Nozzle Puller Set, in a Foam Insert
KL-0186-91 EA - 喷油器起拔器套件，带有工具模块可放于工具箱或工具车内
Part No. Description Qty Part No. Description Qty
产品编号
描述
数量
KL-0186-951
Injector extractor HATZ H-series
1
KL-0186-9000 A Head plate with Cheese-Head Screw 1 1 KL-0186-952 Injector extractor VM-Motori 1 Required Drive Parts
带圆柱头螺钉的顶板
KL-0186-9000 A
推荐配件： 存储系统： KL-0186-9001 A Injector Extractor M12x1 / 45° 1 1 KL-0186-9000-1 Nozzle extractor Head plate 1 (see Chapter Drives):
Recommended Accessory:
喷油器起拔器 M12x1 / 45°
KL-0186-9001 A
KL-0369-4100 Impact Extractor 1.5kg,
KL-0186-9101 A - 补充套件 M14 / 45° KL-4990-9326 - KL-0186-9201 A Injector Extractor M12x1,5 / 30° 1 1 KL-0186-9000-2 Cheese-head screw M8x35mm 2 KL-0049-300 Impact Extractor 4.8kg
KL-0186-9101 A Upgrade Kit, M14 / 45° ,
喷油器起拔器 M12x1.5 / 30°
KL-0186-9201 A
KL-0186-9301 - 补充套件 Denso M14x1,5 / 30° 塑料箱体 KL-0186-950 Tension Joint M18 1 1 KL-0186-9090 Plastic suitcase 1
拉合接头 M18
KL-0186-950
KL-0186-9301 Upgrade Kit, Denso, M14x1.5 / 30° ,
KL-0186-9401 Upgrade Kit, M12x1, 20° KL-0186-9090-2 A Foam Insert 1 1
KL-0186-9090-2 A 泡沫嵌入物
KL-0186-9401 - 补充套件 M12x1 / 20°
80 Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly 81