Page 13 - 吉多瑞KL乘用车精修工具

Kapitel01_EN.fm Seite 11 Donnerstag, 6. Mai 2021 10:54 10

KL-5501-211 (Code 3259439)9) 6 件式 KL-5501-211
( 编码 325943
6 pcs.
MODULO 支架和壁式支架，短型
MODULO and Wall Bracket, short
Suitable for KL-5501 B (NOT for KL-5501).
适用于 KL-5501 B ( 不适用于 KL-5501)。
The mounting kit allows the KL-5501 B spring compressor to be safely and securely
短型 MODULO 支架 / 壁式支架特别适合将固定式弹簧压缩器 KL-5501 B 稳定地安
fixed to the MODULO workshop trolley/workbench KL-4999-120 A or KL-4999-121 A
装在 MODULO 移动式工作台 KL-4999-120 A 或 KL-4999-121 A (GEDORE 1507 XL)
(GEDORE 1507 XL) as well as to an appropriate vertical wall.
上。
Also suitable for space-saving mounting on a vertical wall. However, due to the
proximity to the wall, the use of a hand ratchet is only possible up to a return angle of
也适用于节省在垂直墙壁上的安装空间。但是，由于靠近墙壁，因此只能在大约
approx. 180°. Using the hand crank - KL-5501-40 is excluded. As an alternative, use
180°的回转角度内使用手动棘轮。不能使用手动摇臂 - KL-5501-40 。或者，也可
the long wall bracket - KL-5501-212.
以使用长型壁式支架 - KL-5501-212。
Technical Data:
技术参数 :
Distance to the wall:
105mm (middle drive)
驱动器： 3/8"
KL-5501-212 (Code 3402169)9) 4 件式 KL-5501-212
( 编码 340216
4 pcs.
壁式支架，长型
Wall Bracket, long
Suitable for KL-5501 B (NOT for KL-5501).
适用于 KL-5501 B ( 不适用于 KL-5501)。
The long wall bracket enables stable mounting of the stationary spring compressor -
借助长型壁式支架，能够将固定式弹簧压缩器 - KL-5501 B 稳定地安装在垂直墙壁
KL-5501 B on a vertical wall. Here, the using the hand ratchet as well as the hand
上。手动棘轮和手动摇臂 - KL-5501-40 都可以毫无问题地使用。
crank - KL-5501-40 is possible without problems.
推荐配件：
Recommended Accessories:
KL-5501-40 - 手动摇臂
KL-5501-40 Hand crank
Technical Data:
技术参数 :
245mm (middle drive)
Distance to the wall:
与墙壁的距离： 245 mm（驱动器中心）

KL-5501-40 (Code 3402444) KL-5501-40
( 编码 3402444)
Hand Crank, size 24 mm
手动摇臂 SW24

The hand crank enables an amazingly simple and fast drive of the stationary spring
当张紧和松开麦弗逊弹簧支柱时，手动摇臂可以非常简单和快速地驱动固定式弹
compressor - KL-5501 or KL-5501 B when tensioning and releasing a McPherson
簧压缩器 - KL-5501 或 KL-5501 B。为此，只需将手动摇臂放置在弹簧压缩器 24
strut. For this purpose, the crank handle is simply attached to the spring compressor
mm 的驱动六边形上方即可。
via the 24 mm drive hexagon.
技术参数 :
Technical Data:
输出轴： 六边形 / 24 mm
Hexagonal / 24mm
Drive:
长度： 195 mm
Length: 195mm
KL-5501-171 (Code 3002969)9) KL-5501-171
( 编码 300296
Nissan、Renault、Fiat 汽车的转接环
Adaptor Ring, Nissan, Renault, Fiat

Suitable for use on front suspension strut assemblies as fitted to Nissan Qashqai
适用于 Nissan Qashqai (J11)、Renault Kadjar 和 Fiat Panda (312, 319) 的前桥弹
(J11), Renault Kadjar and Fiat Panda (312, 319).
簧支柱。
The KL-5501-171 adaptor ring enables the jaws of the KL-5501 / KL-5501 B spring
该转接环 - KL-5501-171 能够使固定式弹簧压缩器 - KL-5501 / KL-5501 B 的弹簧架
compressor to be safely positioned on the spring plate of the front suspension strut.
牢固地放置在前桥弹簧支柱的弹簧座圈上。
For this, place adaptor ring on upper spring plate. Observe mark Top/oben on
为此，请将转接环放置在上部弹簧座圈上。请注意转接环上的顶部 /Top 标记！
adaptor ring!
Technical Data:
技术参数 :
External Ø:
170mm
外径（Ø）： 170 mm

Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly 11