Page 54 - 吉多瑞KL商用车精修工具

Kapitel_3-4_EN.fm Seite 52 Montag, 7. Juni 2021 8:07 08
4. 发动机维修
4. Engine Maintenance/Repairs

KL-0369-601 (Code 1902059)
KL-0369-601
( 编码 1902059)
Special 4-Pin Socket with Lock Nut
带锁紧螺母的栓杆型扳手
Suitable for MAN and Mercedes HGV engines.
适用于 MAN 和 Mercedes 卡车发动机。
Alternative tool: 80.99603-0121
替代工具：80.99603-0121
Designed to unscrew/screw in and re-tighten the pressure nut at the nozzle holder.
用于拧入和拧出或重新拧紧喷嘴支架上的压紧螺母。拧紧喷嘴上的六角锁紧螺母
By tightening the hex lock nut (with retaining thread M14x1.5) on the injector, the
( 带 M14x1.5 mm 安装螺纹 ) 可防止栓杆型扳手滑动。
socket is prevented from slipping off.
技术参数 :
Technical Data:
驱动器： SW 32（锁紧螺母 SW 22）
Drive: waf 32 (lock nut waf 22mm)
长度：
70 mm
Length: 70mm
KL-0186-14 EA ( 编码 3293793) (DE-GM)
43 pcs.
43 件式 KL-0186-14 EA (Code 3293793) (German Utility Model)
通用喷油器起拔器套装，
Universal Injector Nozzle Puller Set,
在泡沫嵌入物中
in a Foam Insert
Universally suitable for diesel engines, especially for BOSCH injectors with
普遍适用于喷油器连接螺纹 M14x1.5（外螺纹）或 M17x1（内螺纹）的柴油发动
M14x1.5 external thread as well as M17x1 internal thread, and also for DELPHI
机，例如：
injectors with M14x1.5 external thread.
• Mercedes： OM611, OM612, OM613, OM628**, OM629**, OM639, OM640,
Particularly suitable for Mercedes, for example:
OM642**, OM646, OM646 EVO, OM647, OM648
• Mercedes: OM611, OM612, OM613, OM628**, OM629**, OM639, OM640,
• Peugeot、Citroen、Fiat、Lancia、Suzuki： DV6* (16V)
OM642**, OM646, OM646 EVO, OM647, OM648 (**V-engines: engine removal
• Ford： 1.6 TDCi (G8DA, G8DB, HHDA, HHJA, HHJB)
may be necessary for space reasons)
• VW-Audi：1.6, 2.0, 2.5, 2.7, 3.0 共轨 TDI
• Peugeot, Citroën, Fiat, Lancia, Suzuki: DV6 16V (not on Euro 5 [8V] engines)
• Volvo： 1.6 D (D4164T), 2.2 D
• Ford: 1.6 TDCi (G8DA, G8DB, HHDA, HHJA, HHJB)
• Mazda： Y6 (DV6* [16V])
• VW-Audi: 2.0, 2.5, 2.7, 3.0 Common Rail TDI
* 注意：不适用于 Euro 5 [8V] 发动机。
• Volvo: 1.6 D (D4164T), 2.2 D
** 注意：由于空间原因，V 型发动机可能需要拆除。
• Mazda: Y6 DV6 16V (not on Euro 5 [8V] engines)
使用喷油器起拔器套装，可以快速和通过符合规范的方式直接从车上拆卸严重卡
The injector extractor kit enables fast and professional removal of severely stuck
住的喷油器，而无需拆下气缸盖。
injectors directly on the vehicle without removing the cylinder head.
为此，将 4 个带有 M6x1 安装螺纹的支撑螺栓拧入气缸盖上的气门盖安装孔，然
For this purpose, screw the 4 support pins with M6x1 mounting thread into the valve
后在其上放置特殊的拉拔桥。供货范围内包含的间隔螺母可以调节支撑螺栓的高
cover mounting holes on the cylinder head and place the special pull-off bridge over
them afterwards. The spacer nuts included in the scope of delivery enable height
度。通过使用合适的拉杆，现在可以轻松地拉出卡住的喷油器。
compensation of the support pins. By using the appropriate draw spindle, the stuck
提示：
injector can now be taken out.
通过使用可选的补充套装，喷油器起拔器还可用于大量其他的共轨柴油发动
Note: The injector extractor can also be used for many other common rail diesel engines by using
机，例如 PSA 2.7 和 3.0 Hdi (DT17, DT20) FiatDucato 和 Iveco 2.3、2.4 和 3.0 JTD，
the optionally available support pins, draw spindles and supplementary kits. For example: PSA 2.7
and 3.0 Hdi (DT17, DT20); Fiat Ducato and Iveco 2.3, 2.4 and 3.0 JTD; Mercedes CDI (OM651); Renault, 和
MercedesCDI (OM651)、Renault、Nissan、Opel2.2、2.5 和 3.0 dci (G9T、G9U
Nissan, Opel/Vauxhall 2.2, 2.5 and 3.0 dci (G9T, G9U and ZD3); Toyota 2.2 (2AD-FHV, 2AD-FTV).
ZD3) 和 Toyota2.2 (2AD-FHV、2AD-FTV)。
Recommended Drive Parts (cf. Chapter Drives):
推荐的驱动配件 ( 参见驱动一章 )：
KL-0040-175 B Hydraulic Drive Tool Kit with Safety Belt
KL-0040-175 B - 带安全带的液压驱动组件，
KL-0215-35 M25 Hydraulic Hand Pump
KL-0215-35 M25 - 手动液压泵
Storage System:
推荐配件：
KL-4990-9474 Plastic Storage Case
KL-0121-75 - 封闭堵头套装
Recommended Accessory:
KL-0121-75 Set of Vacuum Line Plug
存储系统：
KL-4990-9474 – 工具盒
Scope of Delivery:
KL-0186-14 EA Universal Injector Nozzle Puller Set, in a Foam Insert
供货范围：KL-0186-14 EA - 通用喷油器起拔器套装
Part No. Description Qty
数量
描述
产品编号
KL-0186-121 A Extraction Bridge (Base Tool) 1 1
KL-0186-121 A
拉拔桥（基本工具）
KL-0186-1231-11 Support Bolt 110mm 4 4
KL-0186-1231-11
支撑螺栓 110 mm
KL-0186-1235-3 Set Screw, M6x45mm M6 x 45 mm 4 4
螺纹销钉
KL-0186-1235-3
KL-0186-1235-2 Set Screw, M6x25mm M6 x 25 mm 4 4
螺纹销钉
KL-0186-1235-2
KL-0583-1005 A Pull Spindle, M17x1, with Union Nut 1 1
拉杆 M17x1 带螺母
KL-0583-1005 A
KL-0186-1215 Nut, M16x1.5 1 1
KL-0186-1215
凸肩螺母 M16x1.5
KL-0583-1032 Pull Spindler, M14x1.5 1 1
KL-0583-1032
拉杆 M14x1.5
KL-0369-4505 A Special Bit Insert, Size (waf) 10mm 1 1
KL-0369-4505 A
专用钻头插件 SW10
专用套筒扳手插件
KL-0369-461 A
KL-0369-461 A Special Socket, Size (waf) 29mm 1 1
间隔螺母套装
KL-0186-1251
KL-0186-1251 Set of Spacer Nuts, 5mm 5 mm 1 1
间隔螺母套装
KL-0186-1252
KL-0186-1252 Set of Spacer Nuts, 10mm10 mm 1 1
间隔螺母套装
KL-0186-1253
KL-0186-14 KA - 喷油器起拔器套装 KL-0186-1253 Set of Spacer Nuts, 15mm15 mm 1 1
KL-0186-14 KA Injector Nozzle Puller Set
软轴磁力棒
KL-0126-221
类似于 KL-0186-14 EA，但是在工具盒中 KL-0126-221 Flexible Magnetic Lifter 1 1
Like KL-0186-14 EA, but in a Plastic Suitcase
KL-4990-2001
KL-4990-2001 Plastic Box 塑料收纳箱 2 2
KL-0186-1492 A
KL-0186-1492 A Foam Insert 泡沫嵌入物 1 1
52 Copyright GEDORE Automotive GmbH, Germany, EN / 5.1 formerly