Page 35 - 吉多瑞KL乘用车精修工具

Kapitel02_EN.fm Seite 33 Donnerstag, 6. Mai 2021 10:55 10

2.2 支承接头、轴承和轴套
2.2 Support Joints, Bearings and Bushings
KL-0250-434 (Code 3244288) 6 件式 KL-0250-434
( 编码 3244288)
6 pcs.
KL-0250-43 KA 补充套装
Upgrade Kit for KL-0250-43 K to form
KL-0250-43 KA
用当前供货范围的钻孔工具组 - KL-0250-43 KA 补充夹紧螺钉钻孔工具组 KL-
0250-43 K。
This kit is intended as a supplement to the KL-0250-43 K Drill-Out Tool Kit for Strut
Bolts. The combination of both sets provides you with all the tools of the KL-0250-43 KA
kit.

KL-0326-161 E (Code 2842807)7) 16 pcs. KL-0326-161 E
( 编码 284280
16 件式
16 件式
C 型液压球头拉马套装，需购买驱动配件
Hydraulic Press Tool Set, without Drive,
带有工具模块可放于工具箱或工具车内
in a Foam Insert
Universally suitable for lower/upper suspension ball joints.
普遍适用于支承接头和驱动轴。
Particularly suitable for use on Mercedes W201 (190 Series), W124 (E-Class),
特别适用于 Mercedes W201 (190 系列 )、W124(E 级 )、W211 (E 级 )、W219 (CLS)、
W211 (E-Class), W219 (CLS), W220 (S-Class), W230 (SL) and VW T4 (suspension
W220 (S 级 )、W230 (SL) 和 VW T4 支承接头前桥和 W163（M 级）支承接头前桥
ball joint, front axle) and Mercedes W163 (M-Class) (suspension ball joint, front
和后桥以及 Mercedes W211 (E 桥 )、W219 (CLS)、W220 (S 级 )、W230 (SL) 驱动
and rear axle), Mercedes W211 (E-Class), W219 (CLS), W220 (S-Class), W230 (SL)
轴前桥。
(upper ball joint, front axle).
The KL-0326-161 E hydraulic press tool set is designed to enabling lower and upper
使用液压套件 KL-0326-161 E，可以快速轻松地将支承接头和驱动轴压入和压出
ball joints to be pressed into and pressed out of the lower wishbone quickly and
底部的横向转向架。无需拆下横向转向架，即可在几分钟内将支承接头拆下并安
without any trouble. Removal and installation of the ball joints can sometimes also be
装到车辆上。
carried out in situ on the vehicle within just a few minutes without the need for
dismounting the wishbone.
所需驱动配件：
Required Drive Parts: 17 t， KL-0215-35 M25 - 液压泵，
KL-0040-2500 - 液压缸
KL-0039-1930 - 压紧螺杆
KL-0040-2500 Hydraulic Cylinder (17t), KL-0215-35 M25 Hydraulic Pump,
KL-0039-1930 Pressure Spindle
存储系统：KL-4999-1393 - 塑料箱体
Tool Storage System: KL-4999-1393 - Plastic Storage Case
供货范围：
Scope of Delivery:
KL-0250-43 KA -VW-Audi 夹紧螺钉钻孔工具套装
KL-0326-161 E Hydraulic Press Tool Set, without Drive, in a Foam Insert
产品编号 描述 数量
Part No. Description Qty
KL-0039-1634 短型压力 / 支撑套筒 Ø 34/26 mm 1
KL-0039-1634 Pressure/Support Sleeve, short, Ø 34/26mm 1
KL-0039-1640 短型压力 / 支撑套筒 Ø 40/32 mm 1 1
Pressure/Support Sleeve, short, Ø 40/32mm
KL-0039-1640
KL-0039-1642 短型压力 / 支撑套筒 Ø 42/34 mm 1 1
KL-0039-1642
Pressure/Support Sleeve, short, Ø 42/34mm
KL-0039-1650 短型压力 / 支撑套筒 Ø 50/42 mm 1
KL-0039-1650 Pressure/Support Sleeve, short, Ø 50/42mm 1
KL-0043-8662 A 顶部套筒 VW-T4 1 1
KL-0043-8662 A
Sleeve (top), VW T4
KL-0326-1000 C 型液压拉马支架 1 1
Press Frame
KL-0326-1000
KL-0326-1111 带 O 形环的转接环 1 1 1
KL-0326-1111
Adaptor Ring 1, with O-Ring
KL-0326-1311 带 O 形环的转接环 3 1 1
Adaptor Ring 3, with O-Ring
KL-0326-1311
KL-0326-1312 A 转接环 4 1 1
Adaptor Ring 4
KL-0326-1312 A
KL-0326-1313 A 压力 / 支撑套筒 Ø 60/52 mm 1 1
KL-0326-1313 A
Pressure/Support Sleeve, Ø 60/52mm
KL-0326-1314 压力 / 支撑套筒 Ø 56/48 mm 1 1
KL-0326-1314
Pressure/Support Sleeve, Ø 56/48mm
KL-0326-1411 带 O 形环的转接环 5 1 1
Adaptor Ring 5, with O-Ring
KL-0326-1411
KL-0350-5102 压力套筒 1 1
KL-0350-5102
Pressure Sleeve
KL-4999-1319 泡沫嵌入物 1 1
Foam Insert
KL-4999-1319
KL-0326-20 (Code 1827812) KL-0326-20
( 编码 1827812)
Mercedes 球头专用套筒
4-Pin Lock Nut Socket, Mercedes
Applicable to Mercedes M-Class (W163).
适用于 Mercedes M 级 (W163)。
Alternative tool: W 385 589 00 07 00
替代工具：W 385 589 00 07 00
For loosening and tightening the suspension ball joint lock nut on the steering
用于松开和拧紧转向节上的支承接头紧固螺母。
knuckle/stub axle.
推荐配件：1993 U-20 - 中空式棘轮两用扳手
Recommended Accessory:
1993 U-20 Reversible Ratchet
技术参数 :
Technical Data: 63.0 mm
外径：
Outer diameter:
63mm
内径： 53.0 mm
53mm
Inner diameter:
销栓宽度： 7.5 mm
7.5mm
Pin width:
驱动器： 1/2"
Drive:
1/2"
重量： 360 g
Weight: 360g
Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly 33