Page 46 - 吉多瑞KL商用车精修工具

Kapitel_3-4_EN.fm Seite 44 Montag, 7. Juni 2021 8:07 08
3. 制动系统维修 Kapitel_3-4_EN.fm Seite 45 Montag, 7. Juni 2021 8:07 08
4. Engine Maintenance/Repairs
3. Brake Service/Repairs

KL-1070-11 (Code 3281590) KL-1070-12 (Code 3281604)
KL-1070-11 KL-1070-12
( 编码 3281590)
6 pcs.
6 件式 3 pcs.
冲击六角扳手套装
Set of Hex Slogging Spanners Set of Bi-Hex Slogging Spanners
Suitable for use on brake calliper bolts with hex profile as found at the front and Suitable for use on bolted connections with bi-hex profile at the cardan shaft as
适用于带 SK 型材的刹车制动器螺钉连接，例如 Mercedes-Benz Atego 和
rear axle of: Mercedes Benz Atego and Actros; MAN TGL; DAF 105 and DAF 106; found on MAN, Mercedes-Benz, Renault, Volvo and DAF.
Actros；MAN TGL；DAF 105 和 DAF 106；Renault 12t；Volvo；IvecoStralis、
Renault 12t; Volvo; Iveco Stralis, Daily and Eurocargo; Scania as well as on Also applicable to brake calliper bolts with bi-hex profile on BPW and SAF axles.
Daily 和 Eurocargo；Scania 和 Kässbohrer 巴士的前桥和后桥。
Kässbohrer buses.
冲击扳手套装特别适用于轻松地松开和拧紧刹车制动器螺钉连接，即使是在可达 The slogging spanners are designed to ease the loosening/tightening of bolted
The hex slogging spanner set is designed to ease the loosening/tightening of brake connections at cardan shafts and brake callipers. The ideal tools for applications
性差的地方。由于加长的杠杆作用而刻在冲击扳手上的扭矩转换公式和 3/4" 的内
calliper bolts, even in areas difficult to access. The slogging spanners feature a 3/4“ where access is difficult.
部方形都使螺钉连接能够用扭矩扳手正确拧紧。
square socket and are engraved with a torque conversion formula (necessary due to The slogging spanners feature a 3/4“ square socket and are engraved with a torque
推荐配件：
the extended lever), thus, allowing the user to tighten brake calliper bolts, with the conversion formula (necessary due to the extended lever), thus, allowing the user to
aid of a suitable 3/4“ torque wrench, quickly and easily according to manufacturer tighten the bolts - by means of a suitable 3/4“ torque wrench - quickly and
8563-10 - 扭矩扳手 155 - 760 Nm，
specifications. professionally in accordance with the manufacturer’s specifications.
600 H-2000 - 头锤 2,000 g
Recommended Accessory:
技术参数 :
8563-10 Torque Wrench, 155-760Nm, SW18, SW22, SW24, SW26, SW27, SW30 Recommended Accessory:
扳手开口度：
600 H-2000 Engineer’s Hammer, 2,000g 8563-10 Torque Wrench, 155-760Nm,
轮廓： 六边形 600 H-2000 Engineer’s Hammer, 2,000g
内四边形： 3/4"
Technical Data:
供货范围： 18mm, 22mm, 24mm, 26mm, 27mm, 30mm Technical Data:
Waf size:
KL-1070-11 - 冲击六角扳手套装 Hex Waf size (bi-hex): 19mm, 21mm, 24mm
Profile:
Square socket: 描述 3/4" 数量 Profile: Hex
产品编号
KL-1070-1118 SK 冲击扳手 SW 18 1 Square socket: 3/4"
KL-1070-1122 SK 冲击扳手 SW 22 1
Scope of Delivery: SK 冲击扳手 SW 24 1 Scope of delivery:
KL-1070-1124
KL-1070-11 Set of Hexagonal Slogging Spanners 1 KL-1070-12 Set of Bi-Hex Slogging Spanners
KL-1070-1126 B
SK 冲击扳手 SW 26
Part No. Description SK 冲击扳手 SW 27 Qty 1 Part No. Description Qty
KL-1070-1127
KL-1070-1130
SK 冲击扳手 SW 30
KL-1070-1118 Hex Slogging Spanner, 18mm waf 11 KL-1070-1219 Bi-Hex Slogging Spanner, 19mm waf 1
KL-1070-1122 Hex Slogging Spanner, 22mm waf 1 KL-1070-1221 Bi-Hex Slogging Spanner, 21mm waf 1
KL-1070-1124 Hex Slogging Spanner, 24mm waf 1 KL-1070-1224 Bi-Hex Slogging Spanner, 24mm waf 1
KL-1070-1126 B Hex Slogging Spanner, 26mm waf 1
KL-1070-1127 Hex Slogging Spanner, 27mm waf 1
KL-1070-1130 Hex Slogging Spanner, 30mm waf 1
KL-1070-10 B (Code 2968924) 3 pcs. KL-1070-10 B
External Hexalobular Slogging Spanner Set
Suitable for use on brake calliper bolts (with Torx Profile) as found at the front
and trailer axle of Mercedes-Benz Atego (BR 967); MAN TGA, TGS, TGL, TGM and
TGX.
The slogging spanner set is designed to facilitate the loosening and tightening of
brake caliper screws - even in hard-to-reach areas. The slogging spanners feature a
3/4“ square socket and are engraved with a torque conversion formula (necessary
due to the extended leverage). This allows the user to tighten brake caliper screws -
by means of a suitable 3/4“ torque wrench - quickly and easily in accordance with the
manufacturer’s specifications.
Using this tool, dismantling the track rod lever is not necessary.
Recommended Accessory:
8563-10 Torque Wrench, 155-760Nm,
600 H-2000 Engineer’s Hammer, 2,000g

Technical Data:
Size (waf): E18, E20, E24
Profile: External hexalobular
Square socket: 3/4"
Scope of Delivery:
KL-1070-10 B External Hexalobular Slogging Spanner Set
Part No. Description Qty
KL-1070-1018 B External Hexalobular Slogging Spanner E18 1
KL-1070-1020 B External Hexalobular Slogging Spanner E20 1
KL-1070-1024 B External Hexalobular Slogging Spanner E24 1

44 Copyright GEDORE Automotive GmbH, Germany, EN / 5.1 formerly Copyright GEDORE Automotive GmbH, Germany, EN / 5.1 formerly 45