Page 22 - 吉多瑞KL商用车精修工具

Kapitel_1-2_EN.fm Seite 20 Montag, 7. Juni 2021 8:01 08
2. 汽车底盘维修
2. Axle Repair Tools
2.2 支承接头、轴承和轴套
2.2 Support Joints, Bearings and Bushings
KL-1000-20 A (Code 3091600)
KL-1000-20 A
( 编码 3091600)
15 pcs.
15 件式
带套筒组的 65 t 压机的转向节主销
King Pin Press (65t),
with Sleeve Set
普遍适用于商用车。
替代工具：W 739 589 00 33 00
Universally suitable for use on HGVs.
用于快速和通过符合规范的方式压入和压出商用车转向节主销。
Alternative tools: W 739 589 00 33 00
带有可调节挤压框架的转向节主销压机，根据最新的安全要求进行开发，采用紧
Designed for the quick and professional pressing out/pressing in of king pins as
凑且成熟的结构设计，因此操作简单、省时而且特别安全。
found on HGVs.
强大的 65t 液压缸带有集成的手动泵和气动快速提升阀，即使是非常紧的转向节
The king pin press with its adjustable press frame has been developed and adapted
主销也能无故障地压出。
to satisfy the latest safety requirements. Thanks to its compact and ingenious design,
优点：
the king pin press not only saves a lot of time but also allows for easy and, above all,
safe operation.
• 根据最新的安全要求开发。
The heavy-duty 65t hydraulic cylinder with integrated hand pump and the
• 普遍适用，在车辆上以及独立式。
pneumatic quick-stroke ‘extend/retract‘ valve enable even severely seized king pins
• 节省大量时间。
to be extracted with ease.
• 通用可调以及 180°可旋转挤压框架。
• 由于三轴快速调整，在车辆上快速轻松地定位。
Advantages:
技术参数 :
· Developed in accordance with the latest safety standards and requirements.
· Universal use - in situ on the vehicle as well as in a free-standing position.
压力：
65 t
· Saves a lot of time. 290 mm
牵引螺栓之间的间隙：
· Universally adjustable press frame can be rotated 180°.
净高（最大）：
480 mm
· The three-axle quick adjustment mechanism allows for the quick and easy
冲程：
120 mm
positioning of the press on the vehicle. 420 bar
额定压力：
最大供气量： 13 bar
重量：
Technical Data: 约 130 kg
约 3.5 升
注油量：
Press capacity: 65t
Clear width between threaded bolts:
供货范围： 290mm
Clear height (max.):
480mm
KL-1000-20 A - 带套筒组的 65 t 压机的转向节主销
Stroke: 120mm
产品编号 描述 数量
Nominal pressure: 420bar
KL-1000-200 A 不带套筒组的 65 t 压机的转向节主销 1
Compressed air connection: max. 13 bar
KL-1000-230 A 套筒组 1
Weight: approx. 130kg
Oil fill volume: approx. 3.5 litre
Scope of Delivery:
KL-1000-20 A King Pin Press (65t), with Sleeve Set
Part No. Description Qty
KL-1000-200 A King Pin Press (65t), without Sleeve Set 1
KL-1000-230 A Sleeve Set 1

KL-1000-2055 (Code 2996553)3)
KL-1000-2055
( 编码 299655
套筒 Ø 69 mm，长度 74 mm
Sleeve, Ø 69mm, Length 74mm
Suitable for MAN HGVs.
适用于 MAN 商用车。
Necessary for pressing out/pressing in the king pins found at the front axle of MAN
在压入和压出 MAN 商用车前桥上的转向节主销时需要用到，与转向节主销压机
HGVs/commercial vehicles. The sleeve is used in conjunction with the KL-1000-20 A
KL-1000-20 A 结合使用。
king pin press.

20 Copyright GEDORE Automotive GmbH, Germany, EN / 5.1 formerly