Page 51 - 吉多瑞KL乘用车精修工具

Kapitel02_EN.fm Seite 49 Donnerstag, 6. Mai 2021 10:55 10

2.3 Wheel Bearings, Wheel Hubs and Drive Shaft
2.3 轮毂轴承 / 轮毂，万向轴
KL-0039-1413 (Code 2354578) KL-0039-1413
( 编码 2354578)
Centring Ring, Ø 70mm
定心环 Ø 70 mm
For supporting/centring the housing of the wheel bearing tool on the wheel bearing
用于将轮毂轴承工具外壳支撑或定心在轮毂轴承外壳上。
housing (knuckle).
KL-0039-1414 (Code 2354683) KL-0039-1414
( 编码 2354683)
Centring Ring, Ø 75mm
定心环 Ø 75 mm
For supporting/centring the housing of the wheel bearing tool on the wheel bearing
用于将轮毂轴承工具外壳支撑或定心在轮毂轴承外壳上。
housing (knuckle).

KL-0039-1415 (Code 2354802) KL-0039-1415
( 编码 2354802)
Centring Ring, Ø 80mm
定心环 Ø 80 mm
For supporting/centring the housing of the wheel bearing tool on the wheel bearing
用于将轮毂轴承工具外壳支撑或定心在轮毂轴承外壳上。
housing (knuckle).

KL-0039-807 B (Code 3291154) 6 件式 KL-0039-807 B
( 编码 3291154)
6 pcs.
支撑环组
Support Ring Set
Fits universally for cars and vans.
普遍适用于汽车和货车。
When removing and installing wheel bearings, there is usually the problem of a very
拆卸和安装轮毂轴承时，通常会出现轮毂轴承外壳背面接触面很小或接触面不平
small bearing surface or an uneven bearing surface on the rear of the wheel bearing
整的问题。因此无法使用 KL-0039-... 系列的标准外壳和定心环进行支撑。
housing. A support is therefore not possible by the standard housings and centring
特殊的支撑环组能够安全支撑具有极小接触面或不平坦接触面 ( 例如通过 ABS 传
rings of the KL-0039-..Series.
感器 ) 的轮毂轴承外壳。
The special support ring kit enables a safe support of wheel bearing housings with a
通过支撑环上的特殊凹槽设计，即可避免触及轮毂轴承外壳接触面的不平整位置。
very small contact surface or uneven contact surfaces, for example due to the ABS
sensor.
包括：
Unevenness on the contact surface on the wheel bearing housing can be easily
KL-0039-1402 - 外壳： KL-0039-1505 - 圆柱形支撑环：
bridged by means of the special recesses on the support rings.
外径 (Ø)：104 mm 外径 (Ø)：104 mm
Consisting of:
内径 (Ø)： 84 mm / 90 mm 内径 (Ø)：84 mm
KL-0039-1402 Housing:
KL-0039-1505 Support Ring, Cylindrical:
高度：85 mm 高度：53 mm
Outside-Ø: 104mm Outside-Ø 104mm
Inside-Ø: 84mm / 90mm
Inside-Ø: 84mm
KL-0039-1503 - 锥形支撑环 KL-0039-1506 - 定心环：
Height: 85mm
Height: 53mm
外径 (Ø)：99 mm 外径 (Ø)：60 mm
内径 (Ø)：74 mm 内径 (Ø)：20.5 mm
KL-0039-1503 Support Ring, Conical
KL-0039-1506 Centring Ring:
Outside-Ø: 99mm
高度：39 mm 高度：20 mm
Outside-Ø 60mm
Inside-Ø: 74mm Inside-Ø: 20.5mm
KL-0039-1504 - 锥形支撑环： KL-0039-1509 - 圆柱形支撑环：
Height: 39mm
Height: 20mm
外径 (Ø)：99 mm 外径 (Ø)：104 mm
KL-0039-1509 Support Ring, Cylindrical:
KL-0039-1504 Support Ring, Conical:
内径 (Ø)：74 mm 内径 (Ø)：85 mm
Outside-Ø 104mm
Outside-Ø: 99mm
高度：44 mm 高度：45 mm
Inside-Ø: 74mm
Inside-Ø: 85mm
Height: 44mm Height: 45mm
KL-0192-5 (Code 1811207) KL-0192-5
( 编码 1811207)
卡簧钳 Ø 40 - 100 mm
Circlip Pliers, Ø 40-100mm
Due to the 45° angled tips, this tool is ideal for inside circlips. Required for gearbox
这些钳子带有 45°角钳头，适用于修理齿轮箱和轮毂轴承时的内部卡簧。
and wheel bearing repairs.
技术参数 :
Technical Data:
长度： 220 mm
Tip Ø:
2.5mm
钳头 Ø： 2,5 mm
Length:
220mm
重量： 220 g
Weight: 220g
Copyright GEDORE Automotive GmbH, Germany, 10.E1 formerly 49