Page 83 - PlatinumTools端子光纤工具

We Make Connections EZ! Test & Measurement

Tone and Probe Set
With its steady tone, push-to-scan button, and a clear loudspeaker, quickly trace and identify
cable locations on jacks or through walls. Wire bundles are easily penetrated with the tapered
probe tip and the probe volume is controlled with a thumbwheel. With common send and receive RJ11 connector for
frequencies, the TP150 is versatile enough to be used with other tone generators or probes. phone lines

Probe Features Tone Generator Features
• Recessed push-button activates • Slide switch to select TONE/OFF/CONT
tone scanning when needed • Continuity mode to verify if a wire is broken
• Tapered tip allows easy penetration • Alligator clips to test pairs and an RJ11
of cable bundles connector for phone lines
• Side thumb wheel adjusts volume and • Tone Generator Output: 1.5KHz Alligator clips
turns off power to reserve battery power square waveform to test pairs
• Probe Sensitivity: 100Hz~300KHz

Part # Description
TP150 Tone and Probe Set

Includes Carrying Case,
9V Batteries, and User
Instructions

Designed Specifically
for Easy Cable Tracing
and Identification.

PoE Detector
This pocket sized tool detects PoE end/mid-span voltages on network cables.
LED indicators instantly show “GO/NO-GO” detection on PoE networks. Plug cables
into the built-in RJ45 jack or use the included patch card to detect voltage in wall
jacks. Differentiates between End-span power which is supplied from PoE equipment
(PoE switch or router) and mid-span voltage from injectors.

Features
• Go/No-Go PoE Voltage Detector
• Voltage pair detection 1/2, 3/6, 4/5, 7/8
• Bright LED indicators
• Plug direct or use included patch cord
• 802.3af or 802.3at compatible Part # Description
• Pocket-size TPS100C PoE Detector

www.platinumtools.com See Page 106 For Warning Information 81