Page 307 - 凯能全英文KleinTools Catalog 167

Pliers

WIRE MESH GRIPS INTRODUCTION
WIRE MESH GRIPS INTRODUCTION GRIPS MESH WIRE and Crimpers Strippers, Cutters,

Wrenches
Klein mesh pulling-grips are used for pulling overhead or underground cable, Prefix Letter Code
Drivers and
for stringing service or communication lines into buildings, for pulling wire KPJ Pulling, Junior-Duty, Closed-Mesh,
through conduit, and for general underground construction.
Single-Weave, Light Duty, Flexible Eye
Klein grips may be used for pulling bare or insulated wires, and wire rope. KPL Pulling, Closed-Mesh,
They install quickly and easily, and are designed to pass readily through ducts, Single-Weave, Flexible Eye
conduit, blocks, and sheaves. and Measurement Conduit Tools
KSRK Slack-Pulling, Light-Duty, Split-Mesh,
Klein grips are reusable and do not damage the cable because pulling tension Single-Weave, Rod Closure, Offset Flexible Eye
remains uniform along the length of the grip. The mesh will fit either a single
cable, or a bundle of cables. KPM Pulling, Medium-Duty, Closed-Mesh,
Double-Weave, Flexible Eye
Klein pulling grips are woven of galvanized steel – strong and long lasting.
KSCK Slack-Pulling, Meduim Duty, Closed-Mesh,
Double-Weave, Offset Flexible Eye Tool Kits
KSSK Slack-Pulling, Meduim Duty, Split-Mesh,
Double-Weave, Lace Closure, Offset Flexible Eye
KP Pulling, Heavy-Duty, Closed-Mesh,
Double-Weave, Flexible Eye
KPS Pulling, Heavy-Duty, with Rotating Eye,
Closed-Mesh, Double-Weave and Comfort Safety, PPE

Jobsite
Accessories

General Application Information Tool Storage

KPJ junior-duty series is used for small-job requirements where pulling tensions
are low. Typical uses are to connect insulated building wire bundles to pulling
tape, and pull through conduit.
KPL light duty grips are economical for applications such as industrial plant
wiring and rewiring jobs, and in underground electrical construction where Voice/Data/Video
pulling tensions are low.
Catalog Number Explanation
KSRK light-duty, slack-pulling grips are split mesh, single-weave design with
rod closure for quick installation. Application areas similar to KSSK series, KPS — 050 — 2
except mesh lengths are shorter and for lower pulling loads. Grip Type* and Cat. No.** Final Digit, if any, refers to
Mesh Size Code mesh length range or actual
KPM medium-duty grips are flexible and easily handled; ideal for use where the dimension.
exceptional strength of heavy-duty grips is not required. Measurement Test and
* See Prefix Letter Code explanation.
KSCK medium-duty slack-pulling grips with closed double-weave mesh are used ** On Junior-duty grips, initial digit "0" is omitted in Cat. No.
for final placement of underground cable where cable end is available, or for Example:
removing cable. Standard lengths are used in restricted space for short pulls.
Where space is not restricted, longer lengths are used for higher pulling loads. Cat. No. KPS-050-2 is a heavy-duty pulling grip with a rotating eye, for use
with cable diameters from .50" to .61", with medium-length mesh.
KSSK medium-duty slack-pulling grip applications are similar to the KSCK
series except they are used where cable end is not available. Double-weave split and Accessories Power Tools
mesh has lace closure.
KP heavy-duty grip series are recommended for underground installations.
KPS heavy-duty grip series are also recommended for underground installations.
An additional feature of the KPS includes "rotating eye" to allow twists in the cable
to spin out during slack periods. & Structural Lifting, Pulling,
www.kleintools.com > 800-553-4676 305 and Structural Lifting, Pulling,