Page 294 - 凯能全英文KleinTools Catalog 167

Pliers
WIRE PULLING GRIPS

Strippers, Cutters, and Crimpers RECOMMENDED CARE AND MAINTENANCE

Grip Cleaning, Lubricating and Inspecting
The following guidelines have been established to keep all grips in good working condition. Body Jaws
Side
Jaws plates
Drivers and Wrenches INSPECTION
closed

Step 1. Carefully inspect jaw condition, proper alignment of jaws and all parts,
and possible distortion caused by exceeding safe-load specifications. Grips should 1
operate smoothly. Spring-loaded grips should lock open with loop handle in "Down"
Conduit Tools and Measurement position and should close automatically with loop handle "Up." The Klein Parallel To lock Loop
Jaw Grip may be tested by opening and closing the jaws by hand, exercising proper
handle
caution. All parts and rivets should be checked for distortion.
open
CLEANING

Tool Kits 2 3

Safety, PPE and Comfort

Step 2. Use the Klein Grip
Cleaning Wire Brush Set (Cat. No. 25450) Step 3.
Spray degreaser on the grip jaws, all
to clean the surfaces of grip jaws. joints and moving parts.
Jobsite Accessories Step 4. Use the Klein Grip 5
4
Cleaning Wire Brush to remove dirt
and debris from the grip jaws.
Tool Storage Step 5.

Wipe grips dry with a cloth. Repeat necessary
cleaning steps until grip is completely clean.
Voice/Data/Video LUBRICATING

Step 6.
6
Apply lubricant to all joints and moving parts.
Do NOT lubricate gripping surfaces of jaws.
Test and Measurement

Note: Conductors may have a die-grease coating which can deposit on grip jaws. New conductors should
be wiped clean before grip application. Grip jaws should be wiped clean of all grease before use.
Power Tools and Accessories Never repair any grip. Grips that are bent, misaligned, or otherwise distorted should be discarded and replaced.

If there is ever a question about the safe condition of any grip, please contact Klein Tools Customer Relations directly
at 844-395-3235 or email HIsupport@kleintools.com.
Lifting, Pulling, Lifting, Pulling, & Structural and Structural 292 www.kleintools.com > 800-553-4676 See Wire Pulling Grips warnings on page 290