Page 279 - UniorTools-Eng

3055/4B 3058/2 3059
Flywheel puller with external thread Spark plug socket 3/8" with thin wall, 6 Valve seal removal set for motorbikes
point

› material: premium plus carbon steel › material: premium chrome vanadium steel

› surface "nish: blacken to standard DIN 50938 › surface "nish: chrome plated according to ISO
› all treads are right hand 1456:2009
› drop forged, entirely hardened and tempered
Advantages: › intended for use where there is not enough
› The tool has 4 di!erent sizes of external thread, space for working with standard wrenches for

thus enabling coverage of the majority of motor replacing spark plugs

types that have a &ywheel with an internal › inside the socket inserted rubber ring for
thread. holding spark plug
› allows &ywheel removal without pulling motor › material: premium plus carbon steel, polyethylene

from hull › surface "nish: chrome plated according to ISO
› On each axis, there is an attachment for an 1456:2009
open-end wrench that makes the removal of › Dimension of box: 321 x 198 x 54
the magnet easier.
Advantages:
Usage: › enables the removal of valve seals without
› for removal of the &ywheel with internal thread removing the head of the motor

› accessories for assembling pins from " 5mm to "
9 mm
› the accessories cover the following dimensions
SKU D L of spark plugs M10x1, M12x1.25, M14x1.25 and
623215 16 20,9 65 19 80 M18x1.5
› accessories for removing pins diameter " 8mm, "

SKU M M1 M2 M3 S1 S2 A B 623216 18 22,3 65 22 92 13 mm and " 16 mm

620279 M16 x 1,5 M18 x 1,5 M20 x 1,5 M22 x 1,5 19 14 161 161 630 623217 21 25,6 65 19 111
› accessories for assembling seals " 12 and " 14mm

3056/2 Usage:
› The individual piston is set into a lower position. In
Socket 1/2" with thin wall, 6 point the place of the spark plug, an attachment for the
pressure pipe is connected; the cylinder is "lled

with compressed air, which enables the valves to
stay in the upper position.
› Find an appropriate attachment for pulling the
pin, set it onto the cover of the spring, straighten
the magnets with pins and press the springs by
pushing with your hand.
› This enables the pins to be removed from the
groove of the valve.
› Remove the cover and the springs.
› Take the valve seal removal pliers art. 2201/2BI, pull
› material: premium &ex chrome vanadium steel out the seals, take the accessories for assembling

› surface "nish: chrome plated according to ISO the seals, place the new seals.

1456:2009 › Place back the springs and the cover; place the
› intended for use where there is not enough pins and use the accessories for assembling the
place for working with standard socket pins to compress the springs by hand, which
wrenches enables the placement of the pins back onto the
valve.
Important! › Repeat the same procedure on all other valves,
› will not withstand torque according to DIN then remove the accessories for the pressure pipe
standard for standard socket wrenches and repeat the procedure on the next cylinder

SKU L D1 D2
620280 3/4" 38,5 23,9 23,9 61
620281 5/8" 38,5 21,5 22,5 59 SKU
620282 19 38,5 23,9 23,9 60 623219 2100

ENGINE 277