Page 116 - UniorTools-Eng

467SHARK/4DP 582/3P
Powershark cutter Electricians` scissors

› These ultra-powerful cutters are used to easily cut metal wire, including hardened and tempered alloys, and
other extruded metals. They are ergonomically designed to apply a maximum force, while being easy on the
hands. Drop-forged from high carbon steel with induction hardened cutting edges, PowerShark cutter can cut
through up to 6mm of soft metal wire, 3,5 mm of hard steel, and 3 mm of tempered piano wire or steel springs.

In addition to wire, the Powershark cutters will quickly and cleanly cut through 4mm diameter nails, screws › material: premium &ex plus carbon steel
and rivets. › drop forged
› drop forged from Premium Hard Plus carbon steel › cutting edges induction hardened

› double-dipped plastic non-slip handles provide good ergonomic hand grip › surface "nish: nickel plated
› handles plastic dipped
Advantages:
› fully hardened to ~47HRc, with cutting edges induction hardened to ~64HRc

› "nished with an anti-corrosive black coating and lightly oiled
› central cutting edges leave a bevelled "nish on both sides of the cut

Usage:
› for precise cutting of soft (up to 6 mm), hard (up to 3,5 mm) and piano wires (up to 3 mm)
› easily cuts parts such as screws, nails, rivets, etc. up to 4 mm thickness
X
SKU L B A C SKU L C
626490 250 30 12 24 389 601127 145 52 81
cutting capacity (10N=1kg)
SKU L max 2150 N/mm" ∅ max 1600 N/mm" ∅ max 650 N/mm" ∅
583/6
626490 250 3 3,5 6
PVC pipe cutter
469SHARK/4DP
BOLTSHARK cutter with groove

B
C
L
A

› These ultra-powerful cutters are used to easily cut metal wire, including hardened and tempered alloys, and › material: blade from premium plus carbon steel
other extruded metals. They are ergonomically designed to apply a maximum force, while being easy on the
hands. Drop-forged from Premium Hard Plus carbon steel with induction hardened cutting edges, BoltShark Advantages:
cutter can cut through up to 6mm of soft metal wire, 4mm of hard steel, and 3.6mm of tempered piano wire › step cutting mechanism
or steel spring. In addition to wire, the Boltshark cutters will quickly and cleanly cut through 5mm diameter
nails, screws and rivets. The included groove holds thicker wire in position, preventing it from rolling along the › right angle cuts are assured
cutting edge as the jaws are tightened.
› drop forged from Premium Hard Plus carbon steel Usage:
› fully hardened to ~47HRc, with cutting edges induction hardened to ~64HRc › intended for cutting PVC pipes (dim. 195 up to

› "nished with an anti-corrosive black coating and lightly oiled 1" and dim. 210 up to 1, 5" of thickness)
› double-dipped plastic non-slip handles provide good ergonomic hand grip
Advantages:
› Engineered with a two-rivet joint, which uses a compound action to give increased cutting force with less
e!ort.

› The strongest force needs to be applied at the start of the cut, when the handles are furthest apart. BoltShark
cutters are designed with the handles tighter together allowing the maximum force to be applied from the
very start of the cut.
› When cutting thicker diameter wire (over 2.5mm), there is a tendency for the wire to be pushed along the
cutting edges as the jaws are tightened. The addition of a groove on the cutting edge holds the material safely SKU L

in place, preventing this movement and allowing e$cient, one-handed operation.
› Tests show that using grooved BoltShark cutters to cut 2mm piano wire requires only 33% of the force needed 605418 195 1 295
by traditional strong cutters. 609405 210 1.5 385
› Central cutting edges leave a bevelled "nish on both sides of the cut.

› The included groove holds thicker wire in position.
Usage:
› For precise cutting of soft (up to 6 mm), hard (up to 4 mm) and piano wires (up to 3,6 mm).
› Easily cuts parts such as screws, nails, rivets, etc. up to 5 mm thickness.
SKU L B A C
626500 200 34,8 19,5 16,5 347
cutting capacity (10N=1kg)
SKU L max 2150 N/mm" ∅ max 1600 N/mm" ∅ max 650 N/mm" ∅
626500 200 3,6 4,0 6

114 CABLE CUTTING, STRIPPING AND CRIMPING TOOLS