Page 103 - 凯能全英文KleinTools Catalog 167

CONDUIT TOOLS Pliers

Lineman’s Pliers – Fish Tape Pulling

Includes core High-Leverage Side-Cutting features plus, see page 12 for details: and Crimpers Strippers, Cutters,
• Easily pulls 1/8" or 1/4" (0.3 or 0.6 cm) flat steel fish tape
without damaging the tape
• Crimps non-insulated connectors, lugs, and terminals (Cat. No. J2000-9NECRTP) D213-9NETP

Cat. No. Jaw Length Jaw Width Jaw Thickness Knife Length Handle Color Handle Finish Overall Length HANDLE FINISH Wrenches Drivers and
D213-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.797" (2.02 cm) Dark Blue Plastic-Dipped 9.33" (23.70 cm)
J213-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) Dark Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)
Pliers with heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire
D2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) Light Blue Plastic-Dipped 9.33" (23.70 cm)
J2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) Light Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)
Plastic-Dipped JOURNEYMAN™
J2000-9NECRTP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.797" (2.02 cm) Light Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)
Dual-Material and Measurement Conduit Tools

Conduit-Fitting and Reaming Screwdriver
• Hooded-blade design keeps tip from slipping out of screws, especially when
tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use
85191 Tool Kits
• Reams both the inside and outside of the conduit at the same time 19353
• 5/16" (0.8 cm) screwdriver tip with 2-1/2" (6 cm) long shank CONDUIT REAMER
• Longer Cushion-Grip handle provides comfort and more torque for reaming REPLACEMENT BLADE, 2-PACK
• Replaceable reaming blade is held in place with a 1/6" (0.15 cm) set screw Cat. No. Conduit Size Overall Length
85191 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm) 7.5" (19.1 cm) and Comfort Safety, PPE

Conduit Reamer
• Locks onto screwdrivers to ream and smooth thin-wall conduit
• Reams ID and OD at the same time 19353
CONDUIT REAMER
• Two set-screws for round- and square-shank screwdrivers REPLACEMENT BLADE, 2-PACK 19352
• Fits up to 3/8" (1 cm) keystone-tip screwdrivers Accessories Jobsite
• NOT for use on power tools Cat. No. Conduit Size Overall Length
19352 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm) 6.75" (17.2 cm)

Stronger
Power Conduit Reamer 4× Precision engineered 1/4" hex Tool Storage
• Ream conduit and install fittings in a fraction of the time replaceable reaming blade quick connect
• Impact rated to fit into power drill chucks and quick release adapters Bit Retention
• Replacement blades are available and the only approved blade for use in this tool
• Replacement bits are available but any standard 1/4" (1 cm) hex bit will work 85091
19353
CONDUIT REAMER Voice/Data/Video
NOTE: Read and follow safety instructions in power tool owner’s manual. REPLACEMENT BLADE, 2-PACK
Cat. No. Conduit Size Overall Length
85091 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm) 5.75" (14.6 cm)

Knockout Punch Set Measurement Test and
• Optimized design reduces wrench effort
• Slugs are split inside for easy removal
• Maximum capacity of 10 gauge mild steel.
Also cuts aluminum, fiberglass and plastic 53728SEN 53727SEN
• Punches holes cleanly and accurately Cat. No. Conduit Sizes Overall Length and Accessories Power Tools
• Set includes 1/2" or 3/4" (1.3 cm or 1.9 cm) punch and die with draw stud
53727SEN 3/4" (1.9 cm) 4" (10.2 cm)
53728SEN 1/2" (1.3 cm) 2.625" (6.7 cm)
NOTE: Lubricate threads before each use.

www.kleintools.com > 800-553-4676 101 and Structural Lifting, Pulling,