Page 102 - 凯能全英文KleinTools Catalog 167

Pliers
CONDUIT TOOLS

Strippers, Cutters, and Crimpers BX and Armored Cable Cutter ®

•
Cuts armored cable up to 3/8" (0.95 cm) diameter: BX, AC, MC, MCAP and Greenfield
•
• Depth of cut adjusts between standard MC and reduced diameter MC to prevent cable nicks 53726-SEN
Sharp cutting blade eliminates burrs
• Comes with one blade stored in handle for convenience REPLACEMENT BLADE
Drivers and Wrenches • Holds up to six replacement blades in handle (Cat. No. 53726SEN) Overall Length IMPROVED BLADE PROFILE
Cat. No. Cutting Capacity
®
53725 Armored cable up to 3/8" (0.95 cm) diameter: BX, AC, MC, MCAP and Greenfield 7.25" (18.4 cm) 53725
MCAP ® is a registered trademark of Southwire Company.
Conduit Tools and Measurement Electrician's Conduit Scoring Tool
•
Durable zinc cast scoring tool eliminates spiraling
•
• Used for scoring 1/2", 3/4" and 1" (1.3 cm, 1.9 cm, and 2.5 cm) EMT conduit
Klein-designed, patented scoring wheel scores and allows clean conduit snaps without leaving burrs inside
• 1" (2.5 cm) scoring wheel conveniently located in base of the handle; no tools required to replace scoring wheels 88906
Tool Kits • Four roller tracks specifically designed for professional use REPLACEMENT BLADES
•
US Patent D638451
Cat. No. Cutting Capacity Overall Length
1/2" and 3/4" 1"
88906 Scores 1/2", 3/4", 1" (1.3 cm, 1.9 cm and 2.5 cm) EMT Conduit 6" (15.2 cm)
88907 88908
Safety, PPE and Comfort Conduit Locknut Wrench

•
• Easily attach locknuts in tight or deep cut-in boxes
For 1/2" and 3/4" (1.3 cm and 1.9 cm) connectors
• Direct-drive heads rotate each other when twisted 56999
•
Heavy-duty steel construction enables needed torque to loosen or tighten connectors
Jobsite Accessories • Perfect for remodel work where box is filled with existing wires
•
US Patent pending
Cat. No. Size Weight Overall Length
56999 1/2", 3/4" (1.3 cm, 1.9 cm) 11.2 oz (318 g) 9" (22.9 cm)
Tool Storage Conduit Locknut and Reaming Pliers

• Tightens 1/2" (1.3 cm) and 3/4" (1.9 cm) EMT or 1/2" (1.3 cm) rigid locknuts
•
Fits liquid tight fittings and caps
Voice/Data/Video • Reams and deburrs both inside and outside of conduit D333-8
•
Knurled jaws at nose tip pull wire or fish tape
•
Machined nose fits snugly into locknut wings
Cat. No. Jaw Length Jaw Width Jaw Thickness Point Diameter Handle Color Handle Finish Overall Length
D333-8 1.625" (4.1 cm) 0.938" (2.4 cm) 0.5" (1.3 cm) 0.19" x 0.36" (0.48 cm x 0.91 cm) Yellow Plastic-Dipped 7.75" (19.7 cm)
Test and Measurement Locknut Wrench Set

• Patent pending design features opposing offset bends for easy access to difficult to reach locknuts
•
Three wrenches included for most commonly used conduit sizes, 1/2" (1.27 cm),
Power Tools and Accessories • 3/4" (1.91 cm) and 1" (2.54 cm) 50900R
Two internal magnets on each wrench hold the set together for easy storage
• The slim alloyed steel design allows for access when space is limited
• Each wrench is a different color and marked to easily identify size
• Hooked tip latches on locknut for ultimate turn leverage Cat. No. Description Number of Pieces Overall Length Overall Width Overall Height
1.9" (4.8 cm)
1.78" (4.52 cm)
•
3
50900R Locknut Wrench Set
6.46" (16.41 cm)
Steel design is corrosive resistant and durable
Lifting, Pulling, and Structural 100 www.kleintools.com > 800-553-4676