Page 90 - UniorTools-Eng

467SHARK/4DP 469SHARK/4ADP
Powershark cutter BOLTSHARK cutter

› These ultra-powerful cutters are used to › These ultra-powerful cutters are used to easily cut metal wire, including hardened and tempered alloys,
easily cut metal wire, including hardened and other extruded metals. They are ergonomically designed to apply a maximum force, while being
and tempered alloys, and other extruded easy on the hands. Drop-forged from Premium Hard Plus carbon steel with induction hardened cutting
metals. They are ergonomically designed to edges, BoltShark cutter can cut through up to 6mm of soft metal wire, 4mm of hard steel, and 3.6mm
apply a maximum force, while being easy on of tempered piano wire or steel spring. In addition to wire, the Boltshark cutters will quickly and cleanly
the hands. Drop-forged from high carbon cut through 5mm diameter nails, screws and rivets. The included groove holds thicker wire in position,
steel with induction hardened cutting edges, preventing it from rolling along the cutting edge as the jaws are tightened.
PowerShark cutter can cut through up to 6mm › drop forged from Premium Hard Plus carbon steel
of soft metal wire, 3,5 mm of hard steel, and 3 › fully hardened to ~47HRc, with cutting edges induction hardened to ~64HRc
mm of tempered piano wire or steel springs. › "nished with an anti-corrosive black coating and lightly oiled

In addition to wire, the Powershark cutters will › double-dipped plastic non-slip handles provide good ergonomic hand grip
quickly and cleanly cut through 4mm diameter
nails, screws and rivets. Advantages:
› drop forged from Premium Hard Plus carbon › Engineered with a two-rivet joint, which uses a compound action to give increased cutting force with
steel less e!ort.

› double-dipped plastic non-slip handles provide › The strongest force needs to be applied at the start of the cut, when the handles are furthest apart.
good ergonomic hand grip BoltShark cutters are designed with the handles tighter together allowing the maximum force to be
applied from the very start of the cut.
Advantages: › Central cutting edges leave a bevelled "nish on both sides of the cut.

› fully hardened to ~47HRc, with cutting edges › for precise cutting of soft (up to 6 mm), hard (up to 3,5 mm) and piano wires (up to 3 mm)
induction hardened to ~64HRc › easily cuts parts such as screws, nails, rivets, etc. up to 4 mm thickness

› "nished with an anti-corrosive black coating
and lightly oiled
› central cutting edges leave a bevelled "nish on

both sides of the cut
Usage:
› for precise cutting of soft (up to 6 mm), hard (up B
to 3,5 mm) and piano wires (up to 3 mm) C
› easily cuts parts such as screws, nails, rivets, etc. L
up to 4 mm thickness A

SKU L B A C
627533 200 34,8 19,5 16,5 354
cutting capacity (10N=1kg)
SKU L max 2150 N/mm" ∅ max 1600 N/mm" ∅ max 650 N/mm" ∅
627533 200 3 3,5 6

SKU L B A C
626490 250 30 12 24 389
cutting capacity (10N=1kg)
max 2150 max 1600 max 650
SKU L N/mm" ∅ N/mm" ∅ N/mm" ∅
626490 250 3 3,5 6

88 PLIERS