Page 90 - 凯能全英文KleinTools Catalog 167

Pliers
CHISELS & PUNCHES

Strippers, Cutters, and Crimpers

Drivers and Wrenches

Cold Chisels Cat. No. Blade Width Overall Length
• Heat-treated, high-carbon steel for necessary hardness and durability 66140 0.375" (1 cm) 5" (12.7 cm)
0.5" (1.3 cm)
66142
6" (15.2 cm)
•
Cuts, shapes and removes metal
Conduit Tools and Measurement • Corrosion-resistant black finish 66143 0.625" (1.6 cm) 6.5" (16.5 cm)
66144
0.75" (1.9 cm)
7.5" (19.1 cm)
•
Long length works better in hard-to-reach areas (Cat. Nos. 66174, 66177 and 66183)
8" (20.3 cm)
0.875" (2.2 cm)
66145
66146
1" (2.5 cm)
8.5" (21.6 cm)
66142
66174
12" (30.5 cm)
0.75" (1.9 cm)
66177 0.5" (1.3 cm) 12" (30.5 cm)
66177
66183 1" (2.5 cm) 12" (30.5 cm)
Tool Kits Electrician’s Chisel
• One-piece handle and blade forged Cat. No. Blade Width Overall Length
of strong alloy steel 66100 66100 2.75" (7 cm) 8" (20.3 cm)
• Corrosion-resistant black finish
extends to the polished blade edge
Safety, PPE and Comfort Punches 66324 Brass Punches
•
• High-carbon steel for durability • Used where a softer punch is needed, e.g. where
damage may occur from using a hardened punch
Rugged design for impact strength
• Heat-treated for added strength 66313 • Selected brass, correct composition for punch use
and hardness at working end • Knurled handle for gripping easily
Jobsite Accessories • Corrosion-resistant black finish 66343 • Chamfered head for safety 4BPSET5
•
Sold in sets only
Cat. No.
66310 Punch Type Point Diameter Overall Length Cat. No. Kit Contains
1/4" (6.4 mm)
Center Punch
4.25" (10.8 cm)
66311 Center Punch 5/16" (7.9 mm) 4.5" (11.4 cm) 4BPSET5 Point Diameter Overall Length
66312 Center Punch 3/8" (9.5 mm) 5" (12.7 cm) 3/8" (9.5 mm) 6" (15.2 cm)
Tool Storage 66313 Center Punch 1/2" (12.7 mm) 6" (15.2 cm) 1/2" (12.7 mm) 7" (17.8 cm)
1/16" (1.59 mm)
4.25" (10.8 cm)
Pin Punch
7" (17.8 cm)
5/8" (15.9 mm)
66320
3/32" (2.4 mm)
4.75" (12.1 cm)
Pin Punch
66321
3/4" (19.1 mm)
8" (20.3 cm)
66322 Pin Punch 1/8" (3.18 mm) 5" (12.7 cm) 1" (25.4 mm) 8" (20.3 cm)
66323 Pin Punch 5/32" (3.97 mm) 5.25" (13.3 cm) Pin Punches
3/16" (4.76 mm)
5.5" (14 cm)
Pin Punch
Voice/Data/Video 66325 Pin Punch 1/4" (6.4 mm) 7" (17.8 cm) • Used for driving out and removing pins and keys
66324
8" (20.3 cm)
1/8" (3.18 mm)
Drift Punch
66340
•
Tough and resilient shaft made from quality tool steel
9" (22.9 cm)
3/16" (4.76 mm)
Drift Punch
66342
66343
•
Soft head for safety; will mushroom, not chip
66344 Drift Punch 1/4" (6.35 mm) 11" (27.9 cm) • Heat treated for durability and strength
Drift Punch
5/16" (7.94 mm)
11" (27.9 cm)
• Knurled handle for gripping easily
Wire Rope Punches
•
Sold in sets only
Test and Measurement • Used to safely drive out pins and keys in machinery Cat. No. Kit Contains 4PPLSET8
•
Long, two-handed rubber handle to lessen shocks from blows
•
1/16" (2.4 mm)
2.156" (5.5 cm)
• Head attached with wire rope to reduce shock 4PPLSET8 Point Diameter Overall Length
Urethane ring around head to reduce likelihood of chipping
1/8" (2.8 mm)
2.156" (5.5 cm)
•
Precision heat treated to prevent shattering
2.359" (6 cm)
3/16" (4.76 mm)
Power Tools and Accessories Cat. No. Point Diameter Shank Length Overall Length 3/16" (4.76 mm) 2.547" (6.5 cm)
1/2" (12.7 mm)
4.75" (12.1 cm) 20" (50.8 cm)
7WRP13
2.547" (6.5 cm)
1/4" (6.35 mm)
7WRP16
4.75" (12.1 cm) 20" (50.8 cm)
5/8" (15.88 mm)
2.547" (6.5 cm)
1/4" (6.35 mm)
7WRP19
4.75" (12.1 cm) 20" (50.8 cm)
7WRP22 3/4" (19.05 mm) 4.75" (12.1 cm) 20" (50.8 cm) 5/16" (7.9 mm) 2.75" (7 cm)
7/8" (22.23 mm)
2.75" (7 cm)
3/8" (9.9 mm)
7WRP25 1" (25.4 mm) 4.75" (12.1 cm) 20" (50.8 cm) 7WRP22
Lifting, Pulling, and Structural 88 www.kleintools.com > 800-553-4676
1-1/4" (31.75 mm) 4.75" (12.1 cm) 20" (50.8 cm)
7WRP32