Page 29 - EclipseTools_CAT2017_Full

Test Instruments

400-001 LAN Cable Tester With Remote

For testing RJ45/BNC cable Features:
• Multi-network cable tester is specified to quickly test by auto scanning Maximum display range and accuracy for digital multimeters and digital clamp meters and environmental meters
wires continuity, mis-wiring and polarity in your network cables, thin Eth- rdg(reading) Maximum display range Accuracy
ernet (BNC)/10 Base-T (UTP/STP)/356A/TIA-568A/TIA-568B/Token Ring. The value on the digital display,readout. MT-1860/1820: the maximum display range is "5999". When ACV measument using the MT-1270, the maximum display
value is 199.9V, minimum display value is 0.01V.
MT-1232: the maximum display range is "3999".
TEST INSTRUMENTS Individual packing: Blister card Indicates the least significant digit. 4000k 4.000M The range is automatically switched so that the Example
By using the attached remote terminator, you can easily test the cables
MT-1280/1270/1210: the maximum display range is "1999".
before or after the cables are installed. It also allows you to test the ground
For example of measuring resistance at MT-1232
of shielded twisted pairs cables.
Display
Resistance
The accuracy of the AC200 V reading is ±(0.8%rdg+5dgt).
dgt(dilgit)
when measuring AC100V, the accuracy reading display range is 100.9~99.15.
display unit is M or k
4.000k
4000
100V±(0.8%+5dpt)
It represents the error used for processing fractions when
=100+(0.80+0.05) ~100-(0.80+0.05)
The reading is display with three digits.
40.00
40
converting from analog to digital.
=100.9~99.15
SI prefixes
Decimal
Symbol Prefixes
Long Scale
Short Scale
G giga 1X1,000,000,00 1X10 9 Units frequently used USB USB connector V DC voltage
GHz
M mega 1X1,000,000 1X10 6 M , MHz V AC voltage
K kilo 1X1,000 1X10 3 k , kV, kW,kHz
m milli 1/1,000 1X10 -3 mV, mA, mW, mF, mH
µ micro 1/1,000,000 1X10 -6 µV, µA, µW, µF, µH
n nano 1/1,000,000,000 1X10 -9 nA, nF, nH
p pico 1/1,000,000,000,000 1X10 -12 pF, pH A DC current
A AC current
Backlight
MAX Maximum/Minimum Resistance
MIN value
For BNC, RJ-45 Accessories:Pouch bag Hz Frequency
twisted pair test and BNC connector MAX
HOLD Maximum value hold
Capacitance
400-004 Multi-Modular Cable Tester HOLD Data hold
For testing RJ45/RJ11/RJ12 cable Features: Inductor check
• Multi-modular cable tester is specified to quickly test by
auto scanning most of modular cables, USOC 4 / USOC6 / AP
USOC 8 terminating with RJ 45, RJ12, and RJ11 modular plug, wires OFF Auto power off ÛC Temperature ÛC/ÛF
continuity and mis-wiring. It can also be used for testing if ÛF measurement
the cable is crossed pinning or straight through. Moreover, with
the remote terminator, it can be further used in remote testing
even when the cable has already been installed. Low battery ÛC Temperature ÛC
Individual packing: Blister card measurement
Hz
0 Duty Duty cycle
ADJ Zero-ohm adjuster
REL Relative reference
OUT Output terminal
Continuity buzzer
Most of test instruments are
approved by CE EN61010-1 CATII/ CONT. Continuity check
CATIII test . LED
CAT. II Primary circuits or equipments
connected to low voltage Diode test
facilities, such as a standard
wall outlet.
CAT. III Equipment used for Transistor hEF
measurement in building hFE test
facilities, distribution boards,
and circuit breakers.
LED LED test
Accessories:Pouch bag
Sound level
Hygrometer Thermometer Light meter Battery check
RH Air Lux dB meter
12
12