Page 321 - 凯能全英文KleinTools Catalog 167

STRUCTURAL CONSTRUCTION Pliers

3242 and Crimpers Strippers, Cutters,

3245

3246TT Wrenches Drivers and
Hex and Round Bars
•
• Forged fit-up bar is pointed on one end
• Chisel-end is at a 15° angle to give greater leverage
• Cat. No. 3246TT features tether hole for working at height Round Bars and Measurement Conduit Tools
Cat. No. Overall Length Body Diameter End
Hex Bars 3245 30" (76.2 cm) 3/4" (1.9 cm) 15°
Cat. No. Overall Length Body Diameter End 3246 36" (91.4 cm) 7/8" (2.2 cm) 15°
3242 30" (76.2 cm) 3/4" (1.9 cm) 15° 3246TT 36" (91.4 cm) 7/8" (2.2 cm) 15°
3243 36" (91.4 cm) 7/8" (2.2 cm) 15° 3247 24" (61 cm) 3/4" (1.9 cm) 15°
3244 24" (61 cm) 3/4" (1.9 cm) 15° 3248 30" (76.2 cm) 7/8" (2.2 cm) 15° Tool Kits
3240 30" (76.2 cm) 3/4" (1.9 cm) Straight 3241 30" (76.2 cm) 3/4" (1.9 cm) Straight

Barrel-Type Drift Pins
• Machined from quality alloy steel 3261 and Comfort Safety, PPE
• Tapers are uniform and blend into body diameter
• Tough, drop-forged steel will properly end-pein in use Cat. No. Overall Length Diameter Point Diameter
• Heat-treated for strength 3260 7.5" (19.1 cm) 0.688" (1.8 cm) 0.313" (7.95 mm)
0.813" (2.1 cm)
8" (20.3 cm)
3261
0.438" (11.11 mm)
• Black finish for rust resistance 3262 8" (20.3 cm) 0.938" (2.4 cm) 0.500" (12.70 mm)
3263 8" (20.3 cm) 1.063" (2.7 cm) 0.563" (14.29 mm) Accessories Jobsite
Broad Head Bull Pins Standard Bull Pins

3255TT Tool Storage
3265

3255 3259TT Voice/Data/Video

• Forged, heat-treated bull pin increases efficiency by providing a larger • Machined from quality alloy steel
striking surface • Heat-treated for strength
• Angled head and smooth blending of radii increase strength and • Black finish for rust resistance
reduce the danger of chipping
• Below the head, squared-off shoulders have been forged to provide a
surface for applying wrench to loosen wedged bull pins Cat. No. Overall Length Diameter Point Diameter Measurement Test and
• Added resistance to “mushrooming” permits much longer use than 3259 12" (30.5 cm) 1-5/16" (3.3 cm) 0.44" (11.1 mm)
conventional designs and the even taper reduces binding and hang-up
• Cat. Nos. 3256TT and 3255TT feature tether hole for working at height 3265 12" (30.5 cm) 1-1/4" (3.2 cm) 0.44" (11.1 mm)
Standard Bull Pins with Tether Hole For Working At Height
Cat. No. Overall Length Diameter Point Diameter 3259TT 12" (30.5 cm) 1-5/16" (3.3 cm) 0.44" (11.1 mm)
3255 13.75" (34.9 cm) 1-1/4" (3.2 cm) 0.313" (7.9 mm) OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins,
wedges and chisels, shall be kept free of mushroomed heads.”
3256 10" (25.4 cm) 1-1/16" (2.7 cm) 0.25" (6.4 mm) and Accessories Power Tools
Broad Head Bull Pins with Tether Hole For Working At Height
3255TT 13.75" (34.9 cm) 1-1/4" (3.2 cm) 0.313" (7.9 mm)
3256TT 10" (25.4 cm) 1-1/16" (2.7 cm) 0.25" (6.4 mm)
OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins,
wedges and chisels, shall be kept free of mushroomed heads.” & Structural Lifting, Pulling,
www.kleintools.com > 800-553-4676 319 and Structural Lifting, Pulling,