Page 23 - EclipseTools_CAT2017_Full

400-042 Butt Set

High impedance monitor, Polarity indication
Features:
• Recognized as the new industry standard, the 400-042 butt set provides
TEST INSTRUMENTS Rests easily on shoulder Large multi-functional • unsurpassed protection standards and durability assure the butt set
superior quality at an affordable price.
• With its high impedance monitor for data safe operation, technicians can
clip onto a line in Monitor mode without disrupting existing traffic.
will keep working even in the toughest environments.
Polarity LED indications
• New weatherproofing provides enhanced resistance to severe weather conditions.
Electrical
2 kΩ maximum at 48 VDC
Loop limit
panel
DC resistance
Talk mode (nominal 20 mA minimum loop current)
300Ω typical
Monitor impedance 39kΩ nominal at 1 kHz
Rotary dial output
Pulsing rate 10pps+0.8pps
Percent break 61%±2%
Angled bed of Nails Interdigit interval 1000 ms typical
Leakage during break >50 kΩ
DTMF output
Tone frequency error ±1.2% maximum
Tone level -8±2dBm combined(typical)
High versus low tone difference 4 dB maximum
Memory dialing
Memory capacity 12 memories plus last number redialing
Digit capacity 16 digits per memory
PBX pause duration 4 seconds
Monitor amplifier power source 9V transistor; provides 25 hours
continuous use, typical
Speaker levels Low, medium, high
Automatic power shut off After 5 min. of no audio signal
Speaker phone levels Low, medium high
Fuse 250V, 250mA
Power source Shared line and battery power
Physical
Length 10.2”(26.0 cm)
Width 2.8”(7.0 cm)
Height 3.5”(8.90 cm)
Weight 560 g typical
Environmental
Durable hanger Temperature Operating:0 to 50˚C
Storage:-40 to 66˚C
Altitude relative humidity To 10,000 feet 5 to 95%
Individual packing: Color box
900-244 In-Line Modular Adapters (4/6/8 Pin 3 In 1)
Features:
• The 900-244, In-line Modular Adapter allows in-line testing for any plug/jack
combination. It includes two 4-pair jacks plus a modular cord terminated with
Inside 4-pair “universal” plug for accessing any standard 6- or 8-position jack.
• Individual conductors are broken out by pin number and correspond to
eight separate test pads.
• Test equipment can be securely attached to the test pads using alligator clips.
• For quick reference in the field, USOC, T568A, and T568B wiring charts are
Cable Tester printed right onto the body.
Butt Set

8 pin to 8 pin
6 pin Female 205mm
to 8 pin Male
8 pin to 6 pin
205mm
Inside Pin Configuration 4 pin Female 8 pin to 4 pin
Modular tester to 8 pin Male 205mm
Tone Probe Kit 8 pin Female to 8 pin Female Multimeter Individual packing: Blister card
6 6